---
title: "AutoCASH handleiding voor automatische incasso - BOTS4.me"
url: https://bots4.me/nl/autocash-guide/
canonical: https://bots4.me/nl/autocash-guide/
language: nl
updated: 2026-11-06
---

# AutoCASH handleiding voor automatische incasso - BOTS4.me

Lees hoe AutoCASH overdue facturen automatisch herinnert via je ERP met BOTS4.me. Leest Odoo, SAP, QuickBooks en meer. First month free.

# AutoCASH

User Guide - Getting Paid Without Chasing Anyone by Hand

 AutoCASH watches your overdue invoices and sends the reminder your customer is due — on the days you choose, in your company’s name, escalating only as far as you allow. You decide the rules once; it does the uncomfortable part for you, every month, without forgetting anyone and without chasing the wrong person.

## 💰 The Four Levels

Every overdue customer is on exactly one level, and it is not decided by how many days an invoice is overdue. The first letter is always level 0. After that, each new letter to the customer is one level higher than the last, as long as an overdue invoice named in their last letter is still unpaid; when everything overdue in that letter has been paid, the next overdue invoice starts again at the invoice list. Level 0 is not a demand — it is a friendly statement of what is open, and it resolves most cases on its own.

| Level | What the customer receives | Default trigger |
| --- | --- | --- |
| **0** | A list of their open invoices. A nudge, not a demand. | 14+ days overdue by default |
| **1** | First reminder. | after the repeat gap, if still unpaid |
| **2** | Second reminder. | after the next gap, if still unpaid (from Team) |
| **3** | Final reminder. | top step, repeats after each gap until paid (from Team) |

  **Start at level 1 and stay there for a month.** The *Escalate up to* setting (Team tier and up) caps how far AutoCASH will go, no matter how overdue someone is. Raise it only once you are comfortable with the tone and the results — you can always go back down. On Starter it stays at level 1.

## 🔄 How AutoCASH Works - Visual Flow

   📅 A Scheduled Day
Arrives  →  📋 Overdue Invoices
Read from Your ERP  →  🎯 Each Customer
Gets a Level  →  ✉️ The Reminders
Go Out  →  📊 You Get the
Report

Where your ERP can send reminders itself (OFFERIS), the letters are produced and sent by **your own ERP**, with your numbering, your wording and your branding. With any other ERP, or when you switch on *Send reminders from BOTS4.me instead of your ERP*, AutoCASH sends them in the customer’s language, with your payment details and signature: from your own mailbox if you add one as the AutoCASH destination in the Access Manager, otherwise from the BOTS4.me mailbox, with replies going to your account email or the Reply-To address you set. Either way, AutoCASH decides *who* and *when*.

**With Odoo:** AutoCASH sends the letters itself, not through the mail or chatter of Odoo, and writes nothing back to Odoo — no note on the invoice, no follow-up level on the customer. Odoo therefore does not show that a reminder went out; your AutoCASH report does. AutoCASH does not read or use the payment follow-ups built into Odoo either: if you send those too, switch one of the two off so your customers are not reminded twice.

**With Dolibarr:** AutoCASH writes nothing into Dolibarr — no event and no note on the invoice; your AutoCASH report is the record of who was reminded. Dolibarr has its own scheduled job for unpaid-invoice reminders (off by default): if you turned it on, switch it off or leave these customers out of it, so nobody is reminded twice.

**With AutoERP on Odoo:** while AutoERP runs in LIVE, handles your shipping and has *Require the proforma to be paid* and *Email the customer when blocked* on, it reminds customers about the unpaid down-payment invoices of their orders that require prepayment. AutoCASH leaves those down-payment invoices to AutoERP and reminds about every other invoice, including the final invoice.

**AutoCASH + AutoERP: who reminds what.** Overdue invoices are AutoCASH’s job. When AutoERP holds an order because the customer has overdue invoices, it sends no payment reminder of its own while AutoCASH reminds that customer in LIVE — the customer is not on *Never chase these customers* and not paused from a preview. With AutoCASH in Demo, or for a customer AutoCASH does not remind, AutoERP sends its one reminder as before. Unpaid down payments are AutoERP’s job (on Odoo, see above), and a hold over an unpaid proforma is still reminded by AutoERP.

## 🔐 The Preview - Your Safety Net

On every paid plan, the day before a scheduled run AutoCASH emails **you** a list of exactly who is about to be contacted, at which level, and for how much. That is your window to pull someone off the list — a customer who just promised to pay, one in a dispute, or an account your sales team is negotiating with.

On your dashboard, each customer in the preview also gets a row under Logs with two buttons: *Skip this time* (no reminder on that run day only) and *Pause 30 days* (no reminder for 30 days, then reminders resume by themselves). If you press nothing, the reminders go out as planned.

To remove someone, add their customer ID to *Never chase these customers* on your dashboard. It takes effect immediately, including for tomorrow’s run.

## 🚀 Getting Started

1. Connect your ERP on the [dashboard](https://bots4.me/bots/), or install the BOTS4.me app from the Odoo Apps store.
2. Switch AutoCASH on. It starts in **Demo Mode** — it reads everything and contacts nobody.
3. On the Team plan and up (and during your free Discovery month), set *Escalate up to* to **1st reminder** and leave it there to begin with — after the free month Starter keeps it at 1st reminder.
4. Check the run days (1 and 15 by default) and the minimum amount you care about.
5. Wait for the report. It lists exactly who *would* have been contacted. Your first demo report arrives within about an hour of switching AutoCASH on.
6. Happy with the list? Switch Mode from DEMO to LIVE. From that moment your customers start receiving the letters.

**Dolibarr: before you start.** Give the Dolibarr user BOTS4.me signs in with these read rights (Users & Groups › the user › Permissions), with their modules switched on in Setup › Modules:

- **Customer invoices** — read: the open invoices AutoCASH reminds about.
- **Third parties** — read: your customers and their available credits. Without it AutoCASH cannot check credit notes and postpones every reminder.
- **Contacts/Addresses** — read: who receives the letter.
- **Banks & cash** — read: your bank account, printed as the payment details (or fill in *Payment details in reminders* on the dashboard).

Each letter goes to the contact named on the invoice; otherwise to the e-mail on the customer’s card (third party); otherwise to the customer’s contacts with the *Billing* role, or else its first contact with an e-mail. So put the e-mail on the customer card, or give one contact the Billing role. A missing read right is named in your demo report, or in Logs on your dashboard when it stops the run.

## ⚙️ Dashboard Settings Reference

### When it runs

| Setting | Default | What it does |
| --- | --- | --- |
| Run on these days | 1,15 | The only days AutoCASH contacts anyone: days of the month and/or weekdays, comma separated (for example 1,15 or friday). Pre-filled with 1,15; clear the field and AutoCASH does nothing. A day past the end of a short month (e.g. 31) falls back to the last day, so February is never skipped. Weekend days also need the Weekends box checked under Operating Hours. |

### Who gets chased

| Setting | Default | What it does |
| --- | --- | --- |
| Only chase after | 14 days | How far past the due date an invoice must be before AutoCASH considers it at all. |
| Ignore debts below | 0 | Do not chase a customer whose overdue total is under this amount, in your ERP’s main currency — rarely worth the relationship. 0 chases everyone. |
| Never chase these customers | (empty) | Customer IDs from your ERP, comma separated. The accounts you always want to handle personally. |

### Credit Note Protection

A customer whose open credit notes cover their invoices is never reminded — you effectively owe them, not the other way around. Always on, at every tier, with every skipped company listed in your report.

### How hard it escalates

| Setting | Default | What it does |
| --- | --- | --- |
| Escalate up to *(Team)* | 1st reminder | The hard ceiling. Nobody is escalated past this level however overdue they are. Starter stays at the default. |

### How often the same customer may be chased

| Setting | Default | What it does |
| --- | --- | --- |
| Repeat reminders every *(Team)* | 7 days | One number for every level: the minimum gap before the same customer is contacted again. This is what stops anyone being dunned twice for the same debt. Starter stays at the default. |

### What you receive

| Setting | Default | What it does |
| --- | --- | --- |
| Who receives reports and previews | your account email | The after-the-fact report and the day-before preview go to your account email and to the **Management emails** set on the General Dashboard. There is no separate AutoCASH recipient list. |

## 🔍 Demo Mode

Every AutoCASH account starts in Demo Mode and your first run is always a demo. It reads your invoices, applies every rule and works out precisely who would be contacted at which level — then emails you that list instead of contacting anyone. Not one customer hears from it.

The LIVE switch unlocks once you have received a demo report that names at least one customer who would be reminded. A demo report with nobody to remind, and the preview the day before a run, do not count. You can return to Demo whenever you like — before a busy period, or while you change the rules.

## 📊 Reading the Report

### 💰 The money

Total open, total overdue, and how the overdue amount splits across the four levels. This is your aging picture in one glance.

### 👤 Who was contacted

Every customer, their level, the amount, the invoices named in the letter and the address it went to.

### ⚠️ Who was not

Just as useful: excluded accounts, debts under your minimum, and anyone still inside their repeat window.

## ❓ Troubleshooting

| What you see | What it means |
| --- | --- |
| Nothing happens on a scheduled day | Either today is not one of your scheduled run days, or nobody currently meets your minimum amount and minimum days overdue. The report tells you which. |
| A customer was not chased | Check, in order: are they on the never-chase list, is their total under your minimum, are they inside the repeat window, and is their oldest invoice actually past your minimum days overdue. |
| Everyone is stuck at level 1 | That is *Escalate up to* doing its job. From the Team tier you can raise it to 2 or 3 when you are ready. |
| No preview arrives | Previews are included from the Starter plan when *Send Previews* is on. The preview goes out from the ordinary hourly run, and it stays silent on any day that is not the eve of a run, or when nobody would be reminded. |
| A customer says they already paid | AutoCASH reads what your ERP considers unpaid. If a payment is not recorded there yet, the invoice still counts as overdue — Pay2ERP closes that gap by importing payments automatically. |
| Status “failed — will retry” in the report | The reminder to this customer could not be delivered. Nothing is recorded as sent, so the customer does not move up a level, and AutoCASH tries again on a later run; our team is alerted automatically. If the same customer keeps failing, check their e-mail address in your ERP and your ERP connection on the dashboard. |
| Status “skipped — reminded recently” in the report | This customer was already contacted within your *Repeat reminders every* gap (7 days by default), so they are not reminded twice for the same debt. Nothing to do: if they still owe, they are reminded on the first scheduled run after the gap has passed. |
| Status “paused until …” in the report | Someone pressed *Skip this time* or *Pause 30 days* on this customer’s preview row in the dashboard Logs, so the customer gets no reminder up to and including that date. Nothing to do: after that date they are reminded on the next scheduled run as usual. For an account you always handle personally, use *Never chase these customers* instead. |
| “SKIPPED — CREDIT COVERS DEBT” in the report | This customer’s open credit notes are as large as their open invoices or larger, so you owe them rather than the other way round, and no reminder is sent. The report shows open invoices minus credits for each of them (up to 20). If a credit note should not count, settle it in your ERP; once the invoices are larger than the credits again, the customer is reminded on the next run. |
| “Reminders held: Pay2ERP still has … unprocessed payment notification(s)” on the dashboard, and a mail saying the reminders are held | Pay2ERP is active too, *Hold reminders while payments are unprocessed* is on, and Pay2ERP still has payment notifications it has not booked. AutoCASH waits so that a customer who has already paid is not reminded, retries every hour and sends the reminders the same day as soon as nothing is waiting; the mail comes once per held day. What to do: open the Pay2ERP manual folder in your mailbox, book those payments in your ERP and move or delete the notifications. After 3 held days the reminders go out anyway, and the report, if you receive reports, then notes that some listed invoices may already be paid. |
| “Reminders postponed: open credit notes and payments could not be read from the ERP” on the dashboard | Before anyone is reminded, AutoCASH reads the open credit notes and payments, so that no customer whose credits cover the debt gets a letter. Your ERP did not answer that question, so nothing was sent and nothing was recorded; AutoCASH tries again at the next hourly run, for up to 4 days after the scheduled day, and our team is alerted. If it keeps happening, check your ERP connection on the dashboard. |
| A note in the report that invoice(s) “were left out of the totals because their exchange rate could not be used” | These invoices are in a foreign currency with no exchange rate in your ERP, or carry a currency other than EUR and your ERP’s main currency with a rate of 1.0. AutoCASH does not guess a rate, so they are left out of the totals and do not count towards the amount, your minimum or the customer’s level; if the customer is reminded for other invoices, the letter can still list them. The note lists their numbers. What to do: correct the exchange rate of those invoices in your ERP, and the next run includes them. |
| “item(s) are waiting because this month’s allowance of AutoCASH is used up” or “reminder(s) not sent: this month’s AutoCASH allowance is used up” on the dashboard, or the status “waiting — monthly allowance used up” in the report | Every reminded customer uses part of AutoCASH’s monthly allowance, and it was used up, so these reminders were not sent and are not recorded as sent. Choose a plan or add extra usage: the waiting reminders go out at the next daily run once there is allowance again, as long as that is within 4 days of the scheduled day; after that they wait for your next scheduled day. |

## ❓ Frequently Asked Questions

What ERPs are supported?

Odoo (13–19), ERPNext (15–16), Zoho (Books / Inventory), Dolibarr (23 and newer), Microsoft Dynamics 365 Business Central (online), QuickBooks Online, Xero and SAP Business One today. Any other ERP with an API — SAP S/4HANA, Microsoft Dynamics 365 Finance / Sales, Oracle NetSuite and more — is connected on request.

How does billing work?

Subscription-based — a flat monthly rate that includes a monthly usage allowance, topped up every billing period. Reminders are counted against it per customer reminded, and you can top up extra usage anytime — see the plan table on the product page. Your first month is a free Discovery month — no credit card needed.

Can I test without sending real reminders?

Yes! Demo Mode reads your invoices but sends no reminders — only preview reports showing exactly what it would do. First month free.

What are the escalation levels?

4 levels: Level 0 — Invoice List (a friendly list of open invoices), Level 1 — 1st Reminder, Level 2 — 2nd Reminder, Level 3 — Final Reminder. Escalation is sequential: a customer moves up one level per scheduled run once the repeat gap (7 days by default) has passed and an invoice from their last reminder is still unpaid; the top level repeats. You set the entry gate; the repeat gap and the highest active level (Level 1 by default) are Team-tier settings, and Starter stays at Level 1 with the 7-day gap.

Can I exclude certain customers?

Yes. Add their customer IDs to "Never chase these customers" at /bots → Control → AutoCASH to skip key accounts, parent companies or internal entities.

Does it work with Pay2ERP?

Yes. Pay2ERP records incoming payments in your ERP, and AutoCASH reminds only about invoices your ERP still shows as unpaid. With *Hold reminders while payments are unprocessed* on (the default, from the Starter plan), AutoCASH waits while Pay2ERP still has payment notifications it has not processed, and retries every hour. After 3 held days the reminders go out anyway, and your report notes that some listed invoices may already be paid.

How often does it run?

On the days you set in "Run on these days" (the 1st and 15th of each month by default, or weekdays such as every Friday). Clear the field and AutoCASH does nothing. On every paid plan you also get a preview mail the day before each run.

What's the minimum overdue amount?

Configurable — the default is 0, so every overdue invoice is chased. Raise it and customers whose overdue total is below the threshold are skipped. You can also set the minimum days overdue (default 14 days) to avoid reminding for recently overdue invoices.

Does this use AI? We are not allowed to.

No. AutoCASH contains no AI model in any mode or on any tier, and no customer or invoice data is ever sent to an AI provider. Every reminder follows the thresholds you set, so the same ledger always produces the same list. If your compliance team needs it in writing, ask us and we will confirm it for your file.

## 🔒 What AutoCASH Will Never Do

- Contact anyone while Demo Mode is on.
- Contact a customer on your never-chase list.
- Escalate past the level you set.
- Dun the same customer twice for the same thing inside the repeat window you chose.
- Remind a customer without your details — every letter carries your company name, your payment details and your signature, whether your ERP or BOTS4.me sends it.
- Change anything in your ERP. AutoCASH only reads; it never edits an invoice or records a payment.

### 📚 Additional Resources

  [← Back to Product](https://bots4.me/product/autocash/) [⚙️ Setup Dashboard](https://bots4.me/bots/) [🔌 Guide: Getting Connected](https://bots4.me/guide-getting-connected/) [📄 Odoo connector install guide](https://bots4.me/odoo-connector-install-guide/)

## Veelgestelde vragen

### hoe stel ik het escalatieniveau in voor AutoCASH van BOTS4.me?

U kunt het maximale escalatieniveau instellen in de dashboardinstellingen van AutoCASH. De instelling 'Escalate up to' bepaalt tot welk niveau herinneringen worden verzonden. Op de Starter-tier blijft dit vast op niveau 1. Pas het niveau alleen aan wanneer u tevreden bent met de toon en resultaten van de herinneringen.

### kan AutoCASH van BOTS4.me herinneringen in andere talen sturen?

Ja, AutoCASH kan herinneringen in 31 talen verzenden, afhankelijk van de taal van de klant. Wanneer u kiest voor 'Send reminders from BOTS4.me' in plaats van uw ERP, worden de herinneringen automatisch in de juiste taal gegenereerd met uw betalingsgegevens en handtekening.

### wat gebeurt er als een klant een factuur betaalt na een herinnering van AutoCASH?

Wanneer een klant een factuur betaalt die in een eerdere herinnering werd genoemd, start AutoCASH voor eventuele nieuwe openstaande facturen weer op niveau 0. Het systeem houdt bij welke facturen zijn afbetaald en past de niveau’s dienovereenkomstig aan.

### hoe kan ik AutoCASH van BOTS4.me verbinden met mijn ERP-systeem?

AutoCASH werkt met verschillende ERP-systemen zoals Odoo 13 tot 19, QuickBooks Online, Xero, SAP Business One en Microsoft Dynamics 365 Business Central. De verbinding wordt geconfigureerd via de Access Manager van BOTS4.me. Voor andere systemen kunnen er op aanvraag aansluitingen worden gemaakt.

### wordt er een rapport gegenereerd van de verzonden herinneringen door AutoCASH?

Ja, u ontvangt na elke automatische herinneringsronde een rapport via de dashboardinstellingen van AutoCASH. Dit rapport toont welke herinneringen zijn verzonden, aan welke klanten en op welk niveau. Voor Odoo-systemen worden deze herinneringen niet in Odoo zelf geregistreerd, maar wel in het AutoCASH-rapport.

